Related Articles
A ice box by having an ice that is automated and an integrated water dispenser does practically nothing should you not have water line for connecting to it. Numerous houses have fridge water supply line installed during initial construction, but this particular feature wasn’t contained in the original building plans of some domiciles. It is possible to solve this by having an ice maker installation kit that enables you to definitely utilize the plumbing work underneath the sink. The kit gives you the necessary components to hook a water line up to your fridge.
Find your water supply lines beneath your sink. You have three water supply lines under the sink; two lines link straight to the tap as the 3rd line connects to your dishwasher. The valve attached to the best part associated with the tap could be the cool water supply line. Turn the cool water on the supply line clockwise to shut it.
Connect a drill that is 5/16-inch to your drill. Drill holes when you look at the base cabinet walls to route water line from underneath the sink towards the back associated with ice box. Drill since close to your wall that is back of cabinet possible, so that you don’t lose space for storage within the cabinet.
Thread the water line, within the ice manufacturer installation kit, through the certain area behind the refrigerator to underneath the sink. Keep the water that is excess behind the fridge.
Switch on the water that is cold to drain any water kept within the supply line. Utilize pliers to untwist the faucet supply line through the chilled water supply valve.
Wrap threads regarding the water that is cold with 2 or 3 wraps of thread-seal tape. Twist the male end of the quick-tee adapter onto the valve. Wrap the thread that is female the exact opposite end of this adapter with thread-seal tape. Twist the faucet supply line on the feminine end regarding the adapter.
Slip the compression nut that was included with the kit throughout the newly installed supply line. Verify the threads are dealing with the end associated with line. Thread the ferrule through the kit on the brand new line.
Wrap the rest of the male threads in the adapter that is quick-tee thread-seal tape. Insert the water that is new to the opening in the tee. Slide the compression nut on the male threads and tighten it regarding the adapter.
Fasten all three pea nuts regarding the quick-tee adapter with pliers or an adjustable wrench. Usually do not twist the pea pea nuts too tight as this may harm the supply valve, the supply line plus the adapter.
Put the conclusion associated with water line you wish to connect with the ice box in to a 5-gallon bucket. Turn the water that is cold valve on under the sink. Allow one or two gallons of water explain to you the new line to eliminate the atmosphere. Turn from the supply line.
Slip the rest of the compression nut and ferrule within the refrigerator end associated with the brand new water line. Connect the relative line to your water line connector from the back regarding the ice box.
Turn the supply line on yet again. Watch out for leakages after most of the connections. Fasten the connections slightly if a leak is seen by you. If tightening the text will not stop the drip, turn the water off, get rid of the connector and include additional thread-seal tape before reconnecting water line.
Plug your ice box to the wall surface. Coil the excess water line behind the fridge. Drive the fridge from the wall surface.